Repair Sheets Welded sheet Jack holder Opel Vivaro Renault Trafic Nissan Primastar Sill CCC-RB-TVP-WHA

For an additional charge of 50 euros, the parts can also be delivered with a base coat / powder paint baked in (example images orange, increased corrosion protection, especially indoors)

These sheets are manufactured by us and their dimensions are almost identical to the original ones. Recordings (if there are any left).

All sheet metal parts are laser cut and professionally welded.

The base plate of the jack holder and the 2 stiffening plates are 3mm thick and the two side parts are 1.5mm thick. This means that our repair sheets are a lot more stable than the original ones. sheets.

Furthermore, holes have already been provided for welding in (spot welding).

The two large holes are specifically intended for subsequent painting and/or cavity preservation.

• 1Set = 2 pieces (left + right)

!!! Adjustment work/body work on the vehicle and our parts is necessary in order to achieve the highest possible fit !!! Transitions should be sealed with seam sealant or body adhesive !!!

We can also weld the parts on site for you, including new sealing (see pictures).
Working time approx. 2 days including sealing material etc. Price approx. 1,000 euros (the price may vary depending on the condition of the body).